With pinball making a big renewal across the country, Mild Giant desires to make sure that these traditional, lovely machines remain damage-free while being carried. Oh, and we want the people moving them to be safe, too.
At very first glance, pinball devices can appear daunting to move due to the fact that of their weight, size, and fragility. Luckily, our experienced Giants have a few techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox
The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Solid State devices.
Later on machines have hinges and use a locking system to keep the headbox upright. There might likewise be two bolts inside as added security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball machines, you have to get rid of the headbox rear gain access to panel to get to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, but over time the key might have been lost. Frequently, there is a screw keeping this panel in place.
When within, get rid of the bolts and unplug the large ports that have electrical wiring decreasing into the maker. You may want to label these ports to put them back in the ideal spot, but they ought to be various sizes, making it tough to plug back improperly.
You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs
For early Solid State Pinballs, you will require to get rid of the back glass. There is a lock situated on the headbox in among three locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.
Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.
Then, open the back box light panel by raising the lock located on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise the lamp panel in order to swing it open.
Now that you are inside, you can eliminate the bolts, and any plugs that have wires going down into the device. You might wish to identify these plugs to put them back in the ideal spot. You may not have to eliminate the plugs, as the electrical wiring click here must be long enough to permit the headbox to be folded down.
At this moment, you can secure the light panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied secret, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and requires no tools.
If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
If you can Source not fold the head box down, then you require to get within. There is a lock located at the top of the back glass in the center. Use the supplied key to unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will have to eliminate the screen panel. You can do this by raising it up and out. Open the light panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have a different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.
Pinball Machine legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.
But these captive nuts and threaded plates can be damaged, and using extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Move out the playfield glass, and put in a safe place. Next, lift up the playfield by putting your hand where the ball drains, and lift the playfield up.
You should now have access to any nuts that may have been used. Once any nuts have been gotten rid of, change the playfield glass and lock down bar, and lock the front door.
Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Packing the Pinball.
You are now prepared to transfer your pinball device. Before you load it, make sure you remove the pinballs so they don't bounce around during transportation.
If you are moving the pinball using a van or SUV, it may be simpler to remove the legs just prior to filling the maker. Get a pal to assist and have one of you supporting the pinball, while the other eliminates the front legs.
Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it might be much easier to get rid of the legs just prior to loading the machine. Get a good friend to have and help one of you supporting the pinball, while the other removes the front legs.